首页 >> 品牌中心 >> Castrol嘉实多

Castrol Optileb GR 9830

Description
CASTROL OPTILEB™ GR 9830 (previously named Molub-Alloy™ Foodproof 9830) is a special high-temperature grease
formulated from a synthetic oil and solid lubricants, developed for the lubrication of rolling and sliding bearings. This
blend provides for excellent wear protection, increased service life and extended relubrication intervals at the same time.
The grease is excellently suited for high-temperature applications in the food and beverage industries where minimum
lubricant consumption, drip-free lubrication and physiological safety are required. It can also be used as a safety sliding
agent for oxygen installations.
    Description
    CASTROL OPTILEB™ GR 9830 (previously named Molub-Alloy™ Foodproof 9830) is a special high-temperature grease
    formulated from a synthetic oil and solid lubricants, developed for the lubrication of rolling and sliding bearings. This
    blend provides for excellent wear protection, increased service life and extended relubrication intervals at the same time.
    The grease is excellently suited for high-temperature applications in the food and beverage industries where minimum
    lubricant consumption, drip-free lubrication and physiological safety are required. It can also be used as a safety sliding
    agent for oxygen installations.
    Application
    Especially suited for applications in baking and drying ovens in the food and canning industries.
    Due to its low volatility, is also suited for vacuum applications, e.g. coating installations.
    May be used in continuous service up to 250°C and be exposed to temperatures up to 280°C for short-time
    applications.
    Advantages
    Aging resistance at high temperatures
    Thermal and chemical stability
    Resistant to most solvents, even chlorinated hydrocarbons, strong acids, alkalis and oxidizing agents, e.g.:
    acetone, benzene, benzol, boron trifluoride, bromine, chlorine, chlorobenzene, cyclohexane, dioxan, natural gas,
    ethylene acetate, fluorine, halogens, potassium hydroxide, methylene chloride, methyl formiate, sodium
    hydroxide, perchloro-ethylene, petroleum ether, hydrochloric and sulphuric acid, tetrahydrofurane, toluol, 1.1.1.
    trichlorethane, trichlorethylene, xylol
    Excellent lubricating properties – as measured by standard laboratory tests and extensive field evaluations
    Extended relubrication intervals without undue risk of lubricant starvation or increased lubricant consumption
    Below 280°C the lubricant resists the thickening and hardening which is typical of mineral oil products in hightemperature
    applications
    Minimum consumption, economic application and clean operating conditions
    Compatible with the following sealing materials: NBR, EPDM, NR, MWQ, PVMQ, PA, PE, PUR, PTFE
    Physiologically safe; approval by LGA (Bavaria)
    请提交您的基本信息,我们将会尽快与您联系!

相关产品